CASA 212-200/300
Certified Aircraft Support & Repair Station
Call Us: 307-765-9911
CASA-212
Our History & Experience with the CASA 212
From performing Manufacturers Recommended Maintenance Program required inspections and maintenance actions to major structural repairs after failed landings, B & G Industries is up to the challenge on the CASA C-212 Aviocar. With 18 years of experience on the C-212 variants, B & G Industries has established itself as the go-to company for getting the job done!
Extensive Casa 212 maintenance and repair history from early 2006 to present dealing with all facets of the aircraft. Work performed for 8 different US based CASA 212 operators on approximately 20 different C-212 aircraft, with many worked on a repetitive basis.
Repair work and inspections performed in remote locations and foreign countries as well as at the B & G home facility in Greybull, Wyoming (KGEY), USA
Performance on multiple occasions, for multiple customers of all inspections included in the Manufacturers Recommended Maintenance Program document (MRMP), Corrosion Prevention and Corrosion Control document (CPCP), and Supplemental Inspection document (SID).
Multiple aircraft inspected and repaired from state of delivery from foreign countries up to and including subsequent US Airworthiness Certification.
Multiple major repairs and overhauls accomplished on articles such outer wings, stabilizers, landing gear, ramps, doors, wing and empennage leading edges, wing tips, flight control surfaces, and fuselage structure.
LET B & G TAKE YOU FROM
LET B & G TAKE YOU FROM
CASA-212 After Accident
To
CASA-212 After B & G Repairs
CASA-212 After B & G Repairs
B & G INDUSTRIES, LLC. C212-200/300 CAPABILITIES
Â
Repair design, Computer Aided Design/Drafting and DER (FAA Designated Engineering Representative) engineering contracted support for major repair and alteration/Repair consultation.
Major scheduled inspection compliance and component replacement/discrepancy repair/troubleshooting/rigging.
Concurrent Avionics installation services available during scheduled inspections or heavy maintenance.
Non Destructive Inspection/SID, Airworthiness Directive, and Service Bulletin compliance.
Minor and Major crash damage repair planning and execution to include Optical Airframe Symmetry and Alignment.
Structural repair/Overhaul for most airframe components, minor or major.
Landing Gear overhaul and repair.
Composites repairs, minor or major (radome/nose cone, -300/-400 wing tips, fairings and landing gear covers).
Exhaust Deflector and Nose Gear Gravel Deflector STC kit sales and installation (Aero-Twin authorized vendor).
Airframe structural part fabrication per sample or owner/operator drawings I.A.W FAR 21.9 to avoid OEM long lead times, available (outsourced) material analysis, heat treatment, and plating. Full in-house CNC and manual machine shop capabilities.
Exhaust system component weld repairs and miscellaneous weld repairs.
Repair and component de-painting and painting and airframe placards
Interior renovation and alterations.
Tie-down rails/seat tracks, machining, replacement, metric or US standard.
Engine runs and disturbed systems checks.
Remote site repair planning and execution under Repair Station umbrella.
Airframe disassembly and re-location or salvage work.
Authority to purchase parts and services direct from Airbus for North American registered aircraft.
Project Gallery
Exhaust Deflector STC Sales 2
Engine and Propeller Replacement and Rigging
Elevator Leading Edge Skin Fabrication
Elevator and Rudder Repairs, Skin Fabrication, and Re-skin
Door skin Fabrication
Cockpit Bulkhead Damage Repair
Cockpit Bulkhead Damage Repair 2
Center and Outer Wing Attach Fitting Replacement
Center and Outer Wing Attach Fitting Replacement 2
Cargo Ramp Repair and Overhaul
Cad Drawing and 3D Solid Modeling
Bulkhead Repairs and Ramp Hinge Fitting Fabrication
Bleed air heat valve repair
Cockpit Door Latch Fabrication
Cockpit Door Fabrication
Battery Tray Conversion Kit
Airframe Stringer Fabrication
Airframe Retrieval, Salvage, and Rebuild
Aileron Quadrant Mount
Aileron Quadrant Fabrication
Access Doubler Fabrication
Fabricated Cowling bulkheads
Fabricated Battery Tray Assembly
Exhaust Deflector STC Sales
Center and Outer Wing Attach Fitting Replacement
Fabricated Fuel tank valve
Aileron Quadrant Mount
Ice Shield Fabrication
Ice shield repair
Interior Insulation Replacement
Fabricated Landing Gear Adaptor
Fabricated longeron and clip
Fabricated Main Landing Gear Attach Fitting
Fabricated Wing attach angle
Flap hinge machining
Flap Hinge Pylon Parts Fabrication and Repair
Flap Overhaul Tooling
Flap Repair and Overhaul 2
Flap Repair and Overhaul 3
Flap Repair and Overhaul 4
Flap Repair and Overhaul
Floor Panel Fabrication
Fuselage and Main Gear Collapse Repairs 2
Fuselage and Main Gear Collapse Repairs 3
Fuselage and Main Gear Collapse Repairs 4
Fuselage and Main Gear Collapse Repairs Completed
Fuselage and Main Gear Collapse Repairs
Fuselage Compound Curved Skin Fabrication and Replacement
Fuselage Frame Section Fabrication
Fuselage Nose Frame Section Fabrication
Fuselage Skin Fabrication and Replacement
Horizontal stabilizer leading edge spar caps
Ice Damage Repair
Interior Renovation
Leading Edge Fabrication
Leading Edge Fabrication
Leading Edge Fabrication
Leading Edge Fabrication Parts
Lightening protection renewal
MAJORC
Metric and SAE Seat Track Machining and Replacement
Metric Tie-Down Fitting Design and Fabrication
Misc. Component Fabrication 2
Misc. Component Fabrication 3
Misc. Component Fabrication
Misc. Leading Edge Parts Fabrication
Misc. Machined Part Fabrication
Misc. Machined Part Fabrication
Misc. Machined Part Fabrication
Misc. Machined Part Fabrication
Misc. Machined Part Fabrication
Misc. Nose and Wing Part Fabrication
Misc. Nose Part Fabrication
Nose Damage and Gear Collapse Repair 2
Nose Damage and Gear Collapse Repair
Nose Damage and Gear Collapse Repair
Nose Damage Repair and parts Fabrication
Nose Damage Repair and parts Fabrication
Nose Damage Repair and parts Fabrication
Nose Damage Repair and parts Fabrication
Nose Damage Repair and parts Fabrication
Nose Landing Gear Gravel Deflector STC Sales
Nose Landing Gear Mount Fabrication
Nose Landing Gear Overhaul and Repair
Nose Landing Gear Overhaul and Repair
Nose Landing Gear Panel Fabrication
Passenger Door Repair and Overhaul
Pitot Mast Fabrication
Quadrant Cover Fabrication
Ramp Cover Plate Fabrication
Repair and component Painting
Replacement Fitting Fabrication
Replacement Fitting Fabrication
Replacement Fitting Fabrication
Replacement Seat Track Fabrication
Rib Fabrication
Scheduled Inspections, NDI, Heavy Maintenance, and Repair
Scheduled Inspections, NDI, Heavy Maintenance, and Repair
Small Part Duplication
Stabilizer Attach Fitting Replacement
Stabilizer Attach Fitting Replacement
Stabilizer Attach Fitting Replacement
Stabilizer Leading Edge Repair and Overhaul
Stabilizer Leading Edge Repair and Overhaul
Stabilizer Leading Edge Rib Fabrication
Standby Battery Tray Fabrication and Installation
Trim Rods, Terminals, and Tab Hinge
Ventral Door Fitting Fabrication
Ventral Door Repairs and Overhaul
Ventral Door Repairs and Overhaul
Wing attach fitting replacement
Wing attach fitting replacement
Wing Beam Repairs
Wing Leading Edge Doubler Fabrication
Wing Leading Edge Repair and Overhaul 2
Wing Leading Edge Repair and Overhaul 3
Wing Leading Edge Repair and Overhaul
Wing Major Repair 2
Wing Major Repair 3
Wing Major Repair
Wing Tip Repairs
Outer Wing Repairs
